Patch Guidelines

Star Touring & Riding Association is a proud organization, steeped in tradition, camaraderie, and family values. Many of our members have elected to show their pride in membership by wearing the National Association colors (back patch and rockers). In order to establish a sense of uniformity, the Star Touring & Riding Association has established the following guidelines for wearing of patches.

The patches may be sewn on your jacket however the most popular choice has been to sew the patches on a black leather vest. The styles of vest may vary, but the most commonly used are unadorned by fringe, Conchos, or additional coloring.

The large Star Touring and Riding patch is to be sewn on the back of the vest, centered, leaving enough room for the chapter rocker (approximately two inches tall).

The Chapter Rocker patch will be sewn directly beneath the large back patch. There must not be any gap between the large back patch and chapter rocker. When done properly, the two patches will take on the appearance of one patch.

The small arm patch should be sewn on the front of the vest over the left breast. Small rockers denoting your position within the chapter (President etc.) or bike names will be sewn under the small arm patch. Again, care must be taken to prevent gapping between the patches.

No patch will be placed or manufactured to fit above the Star Touring & Riding Association logo. No other club patches may be worn on the chapter vest without prior approval from the International Chapter Coordinator.

The right side of the vest front may be used for the attachment of ride pins.